Whether you are pulling your buggy out of your car boot or just setting off from your front door, getting your buggy ready to go literally only takes a few seconds. Here is how to unfold it safely and securely:
Step 1: release the catch
First, look down near the front right castors (the small front wheels). You will spot a small locking catch holding the frame together. Gently unclip or slide this catch to release the buggy from its folded position
Step 2: Lift and expand
Grab the nadles and simply pull them upwards. As you lift, the frame will naturally start to open and expand. Just guide the sides apart smoothly with steady hands
Step 3: Secure the Upper Lock
Now that the buggy is standing, look for the upper lock (positioned higher up on the back of the frame). Push this lock down firmly until you hear a “click”. That’s your sign that the top half is secure!
Step 4: Secure the Lower Lock and Attach the Footrest
Next, look near the base of the buggy and push the lower lock downwards to secure the bottom half of the frame.
- Time for the footrest: line the footrest up with its slots and give it a push. Don’t worry if it feels a bit stiff for the first few times you do this! It is designed to be a snug fit, so just apply steady, even pressure until it sits securely.
Step 5: Lock the Sides Using the Red Pulleys
Finally, locate the red pulleys situated on both sides around the middle of the frame. Pull these pulleys down to lock the side sections into place. Once these are engaged, your buggy’s frame is totally solid.
✅ some quick safety tips
- Mind your fingers: Ensure your fingers are not caught in the hinges while opening.
- Check Locks: After unfolding, check that all locks are fully engaged before use.
- Flat Surface: Always unfold on a level surface to keep the buggy stable.